How To Activate Register M600 Matrice
- 1.Does DJI GS Pro support Waypoint missions with more than 99 points?
Yes. However, when a flight mission has more than 99 waypoints, DJI GS Pro volition automatically department the waypoints into groups, each containing a maximum of 99 waypoints. When each group of waypoint actions are completed, the mission will pause by default. Yous can proceed the mission past using the "Resume from Last Stopped Point" function.
- 2.What devices support GS Pro?
iPad Air, iPad Air two, iPad Air 3, iPad mini two, iPad mini 4, iPad mini 5, iPad Pro 12.9-inch(1st generation), iPad Pro (x.5-inch), iPad Pro eleven-inch (1st generation)
- 3.What style should I switch my aircraft to for Ground Station Manner?
P Mode for the Phantom iv and whatsoever aircraft released after the Phantom 4. F Mode for aircraft released prior to the Phantom four, including the Phantom three, Inspire i, M100, M600 etc. Substantially, if the controller has an F Way use F Way, otherwise use P Mode.
- 4.What cameras does GS Pro support?
Mavic 2 Enterprise , Mavic 2 Enterprise Dual , Mavic 2 Pro, Mavic 2 Zoom, Mavic Pro, Phantom 3 Standard/4K/Advanced/Professional, Phantom4, Phantom4 Pro, Phantom 4 Pro V2/Advanced, Phantom 4 RTK(SDK Remote Controller), and Zenmuse X3, X5, X5R, X4S,X5S, Z3, Z30, XT2, and XT.
- five.What DJI shipping does GS Pro back up?
DJI GS Pro is compatible with the following DJI aerial platforms and flight controllers: Mavic 2 Enterprise, Mavic ii Enterprise Dual, Mavic ii Pro, Mavic 2 Zoom, Mavic Pro, Phantom 3 Standard/4K/Advanced/Professional, Phantom iv/RTK/Pro/Advanced/V2, P4 Multispectral, Inspire one/Inspire 2, Matrice 100, Matrice 200 V2, Matrice 210 V2, Matrice 210 RTK V2, Matrice 200/210/210 RTK, Matrice 600/600 Pro, A3, N3
- 6.What industries can employ GS Pro?
GS Pro can exist utilized in many industries including architecture, precision agriculture, aeriform mapping, electric inspection, security control, disaster monitoring, and more.
- 7.Does GS Pro support offline maps?
No. To use GS Pro without internet access, cache the map information start. Practice non close or refresh the GS Pro folio during utilise. When no net is available, employ the aircraft to create waypoints or define a flight area.
- viii.Is GS Pro able to calculate whether the battery can comprehend the entire mission?
No, only the current battery percentage is visible onscreen. GS Pro is able to continue a mission from a breakpoint, so when the bombardment is depression, pause the mission, bandy the bombardment and continue.
- nine.Is there a maximum altitude limit?
If the farthest distance planned exceeds 2km, a alarm volition announced merely the mission tin can begin.
- 10.What are Inside Mode and Browse Mode?
In Inside Mode, the aircraft follows an automatically generated route within a called surface area. In Scan Mode, the aircraft follows the fastest route to cover a designated area, which may issue in flying out of the defined expanse.
- 11.Where does GS Pro map data come up from?
From Apple Maps.
- 12.In a multi-shipping mission, how many aircraft does GS Pro support? Practise they have to be of same type?
Multi-aircraft missions are not currently supported.
- 13.What is the distance range betwixt waypoints?
The distance between ii adjacent waypoints can be from 1m to 2000m.
- 14.What happens if GS Pro loses command over the aircraft during a mission?
The aircraft volition continue its mission and terminate all planned deportment.
- 15.What happens if I move a joystick during a mission?
Moving a joystick during a Waypoint Route mission will manually control the aircraft flight speed and heading. After releasing the joystick, the aircraft will resume its preset flight speed and heading.Moving a joystick during a 3D Map Area or 3D Map POI mission will manually command only the flying speed. After releasing the joystick, the shipping will resume its preset flight speed.
- 16.Can I utilize the remote controller to tape video or accept a photo during a mission?
Yes, but this is not recommended as it may affect the mission.
- 17.If I actuate Return to Dwelling during a mission, volition the aircraft render?
Yes.
- 18.Can I cease the motors during mid-flight?
Yes, if the terminate-motor operation in DJI Go or DJI Become 4 has been enabled. This should just be used in an emergency.
- nineteen.Can I interrupt a mission at whatsoever time?
Yes.
- 20.What is the difference between Virtual Debate, GEO Fence and No-fly Zone?
A Virtual Debate is a user divers area in the GS Pro app. GEO Fence and No-wing Zone are pre-loaded by default in DJI aircraft and have a higher priority, thus user cannot edit GEO Contend or No-fly Zones.
- 21.Can I use in-app purchases on other DJI drones?
Aye, but the DJI drones you apply must be compatible with GS Pro.
- 22.Tin I edit flight missions before purchasing 3D Map POI?
Yes, yous can create new flight missions and edit them before purchasing 3D Map POI. Notwithstanding, in order to upload missions to your shipping and initiate them, you must first purchase 3D Map POI.
- 23.Does GS Pro take a flying simulation function?
No, simply GS Pro is compatible with flight simulation. To exercise and so, use the flying simulation function on DJI Assistant two. Please note that the Phantom iii series and Inspire 1 do not back up DJI Assistant two, and therefore practise not feature flying simulation.
- 24.How do I access my Team account information after the software license expires?
The data will be kept for three months afterwards the license expires. Nonetheless, if your Team account license remains expired for more three months, DJI reserves the correct to erase the data in your Team account without prior notice.
- 25.Will the information and purchased functions from the previous version of DJI GS Pro be migrated to the new version automatically?
Yes. Your data and purchased functions volition be migrated to the new version when you download the new version for the first time. The data from the previous version volition be stored in the Personal Workspace associated with your DJI Account.
- 26.Is DJI GS Pro free?
DJI GS Pro is gratuitous to download and users can immediately access features including Virtual Fence, 3D Map Surface area, and Waypoint Road. At that place are also additional paid features that are available through in-app purchase. Please refer to the user transmission for more data.
- 27.Nether what account will the paid features be available?
The paid features will be available nether your DJI Account after purchase. You tin admission these features from whatsoever iPad with your DJI Account data.
- 28.How can I view the flightlogs that other people created using my drone?
Flightlogs are created based on the drone used on the mission and stored within Team records. You can view the flightlogs created by a particular drone if you are on the same team as the drone.
- 29.How can other people view the flightlogs that I create with someone else'southward drone?
Flightlogs are created based on the drone used on the mission and stored inside Team records. Other people tin view the flightlogs created by the drone you used during flight if they are on the same squad as the drone.
- xxx.Can I delete my Squad?
Delight contact support@dji.com to delete Teams. All of the associated information will be erased later on deletion.
- 31.What is the difference between Personal Workspace and Team Workspace?
DJI GS Pro supports two work modes: Personal Workspace for individual drone pilots, and Squad Workspace that supports multi-member collaboration and sharing. The two modes can exist used at the same time. Please refer to the user manual for more than data.
- 32.Can I use DJI GS Pro offline?
Yes. Information technology is recommended to use the "Sync All Information" function to download the information onto the App first before executing offline missions. The App does not automatically download data in the groundwork. The App only stores the data that was final synced.
How To Activate Register M600 Matrice,
Source: https://www.dji.com/ground-station-pro/info
Posted by: jarvissors1938.blogspot.com
0 Response to "How To Activate Register M600 Matrice"
Post a Comment